i cannot reccomend enough a camera bag off of amazon. Its similar to the pirate labs bags that have the customizable dividers. i have 10-11 decks at a time in ultrapro 200 ct boxes and each has a section this is what mine looks like
you can get them for about $30 and there are pockets that hold paper, pens, and dice just fine. the tripod staps work great for rolled up playmats as well
I wasn't sure if this would be better in a new thread, but I through it in here for now.
A few weeks ago I desided it's time to double sleeve some of my decks, because... cards are expensive...
Now, I found some really cool sleeves for one of the decks. But sleeves with images seem to be bad with shuffling and tend to get damaged easily.
So, I'm thinking about tripple sleeving, to protect the sleeves (with for example KMC Character Guard).
Question 1: which Outer sleeves would be best and do they all fit (around Ultra Pro Sleeves)?
Question 2: would the deck still fit in an Ultra Pro Satin Tower? If not, where would it fit?
I have started triple sleeving some cards, have used ultra pro covers and just tried KMC printed edge ones, KMC are a little wider and a looser, but great feel. But both work fine and I am using kmc perfect hard and dragon shield matte. Only thing I am dealing with is air in them all the time, even after removing air it returns
A couple people at my LGS myself being one) use the Holiday boxes. For those interested in the specs, I can fit 3 non-doublesleeved decks in Dragon Shield sleeves in each of the three rows with just enough room to place the Dragon Shield sleeve box at the back of the row. You *can* get four decks into a row, but its packed so tight that you have to take your deck out in pieces and I was concerned about bending cards.
Everyone in my group uses the Stanley cases too. Several of us have replaced most of the yellow bins with acrylic deck boxed (Dragonshield and UltraPro both fit). That increases the overall cost a lot but prevents the cards from falling out.
Alternatively a couple of the guys use the yellow bins and just cut out some rectangles of hobby foam and drop one into each bin on top of the cards. This holds the card in place without creating excess pressure from the lid.
Which dragon shield deck boxes? The ones that hold 100 sleeved cards or the 4 compartment ones? Pics of these in the case?
I too would like to cast my vote for the Stanley FatMax Professional Organizer. It comes with 12 small removable compartments that are well suited for a deck, and 2 double-sized compartments, which can hold 2 decks each (for a total of 16 decks) or what I like to use them for is for oversized cards like Vanguard, Archenemy schemes, or Planechase planes. I bought two of these cases, so I can swap the double-sized compartments out for 16 individual compartments.
On top of each deck I put a clear plastic toploader to make sure the cards stay put and don't slip around when I'm carrying the box.
Will this fit double sleeved cards sideways in the bins? How many double sleeved cards fit in this case?
Inside pics with cards in it?
Pics and counts? Also on top loaders? Thx
Also, do they hold top loaders, sideways and top up?
I have started triple sleeving some cards, have used ultra pro covers and just tried KMC printed edge ones, KMC are a little wider and a looser, but great feel. But both work fine and I am using kmc perfect hard and dragon shield matte. Only thing I am dealing with is air in them all the time, even after removing air it returns
Holiday boxes?
Which dragon shield deck boxes? The ones that hold 100 sleeved cards or the 4 compartment ones? Pics of these in the case?
I really dont care for wood cases, and prefer plastic and came upon this thread while googling.
Will this fit double sleeved cards sideways in the bins? How many double sleeved cards fit in this case?