It's not possible to open the main database, the inventory, and a deck is the problem. Only two things can be open at a time. Is there a way to open a third?
No. .. there is no way to open three items at the same time. Why do you want to do this?
don't know if it is the right section, sorry for this. I downloaded again my registered magicworkstation...but i have A LOT of bugs and crash...i cannot upload trough mws server (error 404 , can't connet to server) , can't upload decks (crash every time) and cannot connect to play (crash)...:-( can you tell me some suggests? thanks!!!
Download the MWS EasyInstall ... (at time of installation use the "extended")
No. .. there is no way to open three items at the same time. Why do you want to do this?
*facepalm*
In order to build a deck from INVENTORY instead of the master base. Right now, the program doesn't allow it. Just as I said in my last couple of posts.
In order to build a deck from INVENTORY instead of the master base. Right now, the program doesn't allow it. Just as I said in my last couple of posts.
To build an inventory you just need the master database (table top) and inventory (table below) ...
If you want to use your inventory to build a deck ... just load it (table top) ... and then build your deck normally (table below) ....
I'm calling it right now- worst rare in the set. Even good limited players will find better bombs at common and uncommon no sweat. Worst. Episode. Ever.
I really do predict this to be our worst rare in set award winner. I'd be happier opening a jar of eyeballs, so I think anything worse is highly unlikely. This card wont just have zero constructed potential, but not be significantly better than a mass of ghouls in a draft.
To build an inventory you just need the master database (table top) and inventory (table below) ...
If you want to use your inventory to build a deck ... just load it (table top) ... and then build your deck normally (table below) ....
That doesn't work. If you try to add a card to a deck from an inventory, it gives an error "Can't add card. Not from in MAIN Master Base. See FAQ for details."
The card is in the MAIN Master Base, and the card was added to the inventory from it, but you can't put a card from your inventory directly into your deck. I don't know why.
Anyone knows a way to make cards bigger in game? Table cards aren't that bad size but hand cards are terrific small and there is a lot of space to make them bigger... but how?
So I'm trying to create a custom Star Wars deck (created from MSE). I have created a new master database that only contains the cards from my custom set. I can create decks, see the images etc but i cannot load the deck in solo mode or online mode.
I get the "invalid file format error". I removed everything and started over with the EasyInstaller (thank you) but i get the same error. Any tips/help would be awesome!!
Pic of me editing decks in MWS so you can see correct Master base is loaded:
So I'm trying to create a custom Star Wars deck (created from MSE). I have created a new master database that only contains the cards from my custom set. I can create decks, see the images etc but i cannot load the deck in solo mode or online mode.
I get the "invalid file format error". I removed everything and started over with the EasyInstaller (thank you) but i get the same error. Any tips/help would be awesome!!
Pic of me editing decks in MWS so you can see correct Master base is loaded:
Install using the MWS EasyInstall ... use the "extended version" and "all games" option. Once installed ... look at the folder where you installed the file "config.ini" ... open it in notepad.
Add another line to all options of the file (eg. "botao10=TEST" )... configure everything correctly (check the games already configured not to miss), use the shortcut that was created on the desktop called "MWS Game Changer" to change between games (including yours).
This should stop the problem (if the database is actually correct).
I've tried different servers AND directly connecting to my friend, but no connection...
It seems some limitation on your connection. Maybe you have a physical firewall (or even the operating system) that is blocking port 4747 ...
In theory EasyInstall configure windows 7/8 to release these ports, but if you have any antivirus that is managing the firewall that can not happen ... check this ...
While thumbing through Un-set and Celebration cards for a fun ridiculous banned in all formats deck, I noticed there's a slightly confusing typo on Splendid Genesis. The Rules text says "Shuffle all cards in the game together and deal them into three decks. The game continues with a new players." It should say "player." I've fixed this on my own, but thought it could be included in the next Masterbase update.
Private Mod Note
():
Rollback Post to RevisionRollBack
Sig By Rivenor
Avatar by DarkNightCavalier
You will not remember my face, your name, or your journey, but in the end...
You will accede my every command.
While thumbing through Un-set and Celebration cards for a fun ridiculous banned in all formats deck, I noticed there's a slightly confusing typo on Splendid Genesis. The Rules text says "Shuffle all cards in the game together and deal them into three decks. The game continues with a new players." It should say "player." I've fixed this on my own, but thought it could be included in the next Masterbase update.
Thanks for reporting the error. In the next update of the MWS EasyInstall this is already fixed!
I have a registered version of Magic Workstation I'm trying to get updated. I am receiving the Debug : memory error when loading the new Born masterbase but it loads fine using my backup (2009 era).
Any workarounds with out having to scrap my registered version. I really play opening 2 windows to playtest more than anything
I have a registered version of Magic Workstation I'm trying to get updated. I am receiving the Debug : memory error when loading the new Born masterbase but it loads fine using my backup (2009 era).
Any workarounds with out having to scrap my registered version. I really play opening 2 windows to playtest more than anything
Use the database without this flavortext the link below... or try install MWS EasyInstall
It didn't have PDS: Slivers or FTV: Exiled or FTV: Relics
I still had my patch files around from when I added the sets the first time. Here they are, along with the updated masterbase: http://www.mediafire.com/?no2wbnk99ikwu
No. .. there is no way to open three items at the same time. Why do you want to do this?
Download the MWS EasyInstall ... (at time of installation use the "extended")
To register it use the menus MWS Play ...
For more details see the link below ...
http://forum.mtgbr.com/viewtopic.php?p=3076#p3076
All Sources For MWS
*facepalm*
In order to build a deck from INVENTORY instead of the master base. Right now, the program doesn't allow it. Just as I said in my last couple of posts.
To build an inventory you just need the master database (table top) and inventory (table below) ...
If you want to use your inventory to build a deck ... just load it (table top) ... and then build your deck normally (table below) ....
All Sources For MWS
EDIT: NVM, only the link on the big green button was broken. Text link worked
Fixed ;-)
All Sources For MWS
That doesn't work. If you try to add a card to a deck from an inventory, it gives an error "Can't add card. Not from in MAIN Master Base. See FAQ for details."
The card is in the MAIN Master Base, and the card was added to the inventory from it, but you can't put a card from your inventory directly into your deck. I don't know why.
Use MWS EasyInstall (link below) ;-)
All Sources For MWS
9 players, >50% of people on the public servers are Players
Just do the inclusion when it leaves the official spoiler Wizards;-)
Have patience ...
All Sources For MWS
I get the "invalid file format error". I removed everything and started over with the EasyInstaller (thank you) but i get the same error. Any tips/help would be awesome!!
Pic of me editing decks in MWS so you can see correct Master base is loaded:
https://www.dropbox.com/s/8ow2s61lf56imrt/Screen%20Shot%202014-01-22%20at%205.21.07%20PM.png
Install using the MWS EasyInstall ... use the "extended version" and "all games" option. Once installed ... look at the folder where you installed the file "config.ini" ... open it in notepad.
Add another line to all options of the file (eg. "botao10=TEST" )... configure everything correctly (check the games already configured not to miss), use the shortcut that was created on the desktop called "MWS Game Changer" to change between games (including yours).
This should stop the problem (if the database is actually correct).
If you have more questions, re-post ...
All Sources For MWS
Change the server where you are trying to connect ...
All Sources For MWS
I've tried different servers AND directly connecting to my friend, but no connection...
It seems some limitation on your connection. Maybe you have a physical firewall (or even the operating system) that is blocking port 4747 ...
In theory EasyInstall configure windows 7/8 to release these ports, but if you have any antivirus that is managing the firewall that can not happen ... check this ...
All Sources For MWS
All Sources For MWS
Avatar by DarkNightCavalier
You will not remember my face, your name, or your journey, but in the end...
You will accede my every command.
Thanks for reporting the error. In the next update of the MWS EasyInstall this is already fixed!
All Sources For MWS
Any workarounds with out having to scrap my registered version. I really play opening 2 windows to playtest more than anything
Use the database without this flavortext the link below... or try install MWS EasyInstall
All Sources For MWS
I got a new masterbase from http://www.mwsgames.com/
It didn't have PDS: Slivers or FTV: Exiled or FTV: Relics
I still had my patch files around from when I added the sets the first time. Here they are, along with the updated masterbase:
http://www.mediafire.com/?no2wbnk99ikwu
Also, http://blog.mtgbr.com/imagens/card-games/magic-the-gathering/languages/#tabs-1-11 is where I got full art images from for every set
Vintage: Dredge | Legacy: Burn, Goblins, Soldier | Standard: Mono-Red Aggro
Commander: Nicol Bolas, Sliver Overlord, Rafiq
Casual: Selesnya Saproling Smackdown, Izzet Labs, Rebel
Played since June 2004, mostly inactive June 2011 to March 2018
Other usernames include AlanFromRochester, homerthebeerbaron
MTG checklists from Alpha to Ravnica Allegiance - https://www.mtgsalvation.com/forums/magic-fundamentals/other-magic-products/third-party-products/805324-checklists-for-everything-from-alpha-to-ravnica